A B S T R A C T Green city is one of the approaches to sustainable development. “green city” is an environmentally friendly city compatible with the concept of sustainable development and can be used for the welfare and security of its inhabitants. Based on the concept of a “green city,” urban managers try to have the least destructive effect on the ecosystems upon which cities rely. Green city is one of the sustainable development approaches that reduce the environmental footprint of cities. The purpose of this study is to evaluate the situation of Mashhad metropolis in terms of the objective characteristics of the green city. In this study, 14 indicators of electricity consumption per capita, green space per capita, population density, water availability, sewage availability, superior public transportation network, urban mass transportation, traffic reduction, annual production waste per capita, carbon monoxide, concentration nitrogen dioxide, sulfur dioxide concentration, particulate matter concentration, and air quality were exerted. To determine the importance of research indicators, the Shannon entropy method, and the status of Mashhad city areas in terms of green city indicators, the VIKOR multi-criteria decision-making method has been applied. The results showed that most areas of Mashhad are average and below average in terms of green city characteristics, and only District 9 is in very good condition (0.636). Also, based on the results of this part of the research, District 5, with the value of VIKOR index of 0.969, is in the last rank in terms of objective characteristics of the green city Extended Abstract Introduction Green city is one of the approaches to sustainable development. A “Green city” is an environmentally friendly city compatible with the concept of sustainable development and can be used for the welfare and security of its inhabitants. Based on the concept of a “green city,” urban managers try to have the least destructive effect on the ecosystems upon which cities rely. Green cities constantly try to manage their environmental effects by reducing waste, increasing recycling, reducing air pollution, increasing population density, developing open urban spaces, and encouraging the development of sustainable local businesses. Green cities were first used to evaluate 30 European cities by the Economist Intelligence Unit (EIU) in 2009 with the financial support of Siemens and the aim of reducing the environmental effects of human activities in cities. In that study, eight indices of carbon dioxide, energy, construction, transportation, water, recycling and land use, air quality, and environmental governance were used. Later, the Economist Intelligence Unit, with the financial support of Siemens, evaluated the status of the green city index in 17 Latin American cities, 15 African cities, 22 major Asian cities, and 27 cities in United States, Canada, Australia, and New Zealand. In recent years, even some Western Islamic scholars have, in various publications, shown that Islam is an ecological religion. In Iran, the issue of protecting the environment has not received much attention regardless of its rich cultural and religious background and its confirmation in Article 50 of the Constitution of the Islamic Republic of Iran. Mashhad is the second metropolis of Iran, located in North-East of Iran, and is one of the counties of Khorasan Razavi Province. According to the 2016 Iranian Population and Housing Census, its population was 3057679 people (The Vice-Presidency of Planning and Development of Mashhad Municipality). In Mashhad, due to several reasons including the presence of Imam Reza Shrine (PBUH) and arrival of millions of pilgrims per year, population growth, increased garbage production (production of 896534 tons of garbage in 2016 (The Vice-Presidency of Planning and Development of Mashhad Municipality), air pollution (increased number of unhealthy days from 46 days per year in 2015 to 88 days in 2016 for sensitive groups and 4 days of unhealthy air for all groups in 2016 (Center for Monitoring Environmental Pollutants of Mashhad Municipality) the 2025 vision of the city has paid attention to the environment in the form of five general objectives; however, just like the national level, no specific pattern for environmentally-compatible urban development, such as green city, is determined. Analysis of the green city index in Mashhad metropolis can considerably contribute to urban managers and planners in addition to providing a pattern for evaluating the present situation in other cities of Iran and improving the quality of life regardless of the current status of the urban environment in Iranian cities; we can preserve these environments as parts of the natural environment for future generations.   Methodology In terms of its goal, the present study is an applied one; in the study, drawing upon other studies and library sources and considering the conditions of Iran and the metropolis of Mashhad in terms of green city, 14 quantitative indices were exerted. To this end, the required data for the quantitative indices was gathered by library research from the relevant institutions. Next, the weights of quantitative indices were determined using Shannon's entropy. Then, using the VIKOR method of multi-criteria decision-making, the status of various districts of the metropolis of Mashhad in terms of quantitative indices of green city was determined. Finally, the map of the spatial distribution of quantitative indices was drawn using the ARC GIS software package.   Results and discussion In this study, to analyze the status of the metropolis of Mashhad in terms of green city features, 14 quantitative indices were used. Considering the value of the VIKOR index ranges from 0 to 1, various districts of Mashhad can be classified into five categories; very satisfactory, satisfactory, average, unsatisfactory, and very unsatisfactory in terms of quantitative indices of green city. The results of the current situation of Mashhad showed that in terms of objective indicators of the green city, District 9 of Mashhad metropolis with a value of VIKOR index of 0.056 is in first place, and the seventh region with a value of VIKOR index of 0.433 is in second place. Also, based on the results of this part of the research, District 5, with the value of VIKOR index of 0.969, is in the last rank in terms of objective characteristics of the green city.   Conclusion Similarly, the results of studies by Afshar (2011) and Shabani et al. (2017) on Tehran metropolis are indicative of the unsatisfactory situation of Tehran (the biggest metropolis of Iran) in terms of green city features. Comparing the results of the studies by Afshar (2011) and Shabani et al. (2017) with the present study on Mashhad (the second biggest metropolis of Iran) reveals the necessity for a comprehensive plan toward achieving green cities. It should be mentioned that, due to the specific conditions of Mashhad metropolis and availability or unavailability of the required data, the indices used in the present study are somewhat different from the ones used by Afshar (2011) and Shabani et al. (2017).   Funding There is no funding support.   Authors’ Contribution All of the authors approved the content of the manuscript and agreed on all aspects of the work.     Conflict of Interest Authors declared no conflict of interest.   Acknowledgments We are grateful to all the scientific

2Background: Antibiotic RESISTANCE represents a critical global concern within the medical community, posing significant challenges in the treatment of infections caused by drug-resistant pathogens. Over the years, broad-spectrum fluoroquinolones have been extensively used to treat infections caused by both Gram-positive and Gram-negative bacteria, including Pseudomonas aeruginosa. In this study, we decided to assess the prevalence of plasmid-mediated quinolone RESISTANCE mechanisms among clinical isolates of P. aeruginosa in Ardabil hospitals. Methods: We analyzed a total of 200 clinical isolates of P. aeruginosa, collected between June 2019 and May 2023. The antibiotic RESISTANCE profiles of these strains against various fluoroquinolone antibiotics were determined using the disk diffusion method. Additionally, we investigated the presence of qnrA, qnrB, qnrC, qnrD, and qnrS genes through polymerase chain reaction (PCR) analysis. Furthermore, we assessed the expression levels of efflux pump genes and outer membrane porin genes using the quantitative reverse transcription PCR (qRT-PCR) in fluoroquinolone-resistant P. aeruginosa strains. Results: Our findings revealed that 69% of P. aeruginosa strains were resistant to fluoroquinolones. The RESISTANCE rates for different fluoroquinolones were as follows: ciprofloxacin 55.5%, ofloxacin 62%, norfloxacin 53.5%, lomefloxacin 55.3%, and levofloxacin 55.5%. Notably, 78.9% of these strains exhibited multidrug RESISTANCE (MDR). Among the qnr genes, qnrB was the most prevalent (2.9%). No other qnr genes were identified. Interestingly, 75% of P. aeruginosa strains carrying the qnrB gene showed overexpression of efflux pump genes, while 100% exhibited down-regulation of the oprD gene. Conclusion: Given the high prevalence of fluoroquinolone-resistant P. aeruginosa clinical isolates in Ardabil hospitals and the multifactorial nature of RESISTANCE, continuous monitoring of antibiotic RESISTANCE trends and understanding the underlying RESISTANCE mechanisms are crucial for selecting appropriate treatment strategies.

To achieve favorable outcomes in breeding programs, selection of parents based on General Combining Ability (GCA) and Specific Combining Ability (SCA) is so important. In order to study the genetic parameters, general and specific combining abilities and the type of disease RESISTANCE genes action against take-all disease in bread wheat, 6 wheat genotypes (729, 1622, 2109, 1528, 1546 and 1526) were crossed in one-way diallel cross. Seeds of F1 generations (F1s) and parents were planted in the research greenhouse of Vali-e-Asr University of Rafsanjan, Iran and take-all disease tolerance, stem and root dry weights, tiller number and elements such as manganese (Mn), zink (Zn), potassium (K) and iron (Fe) concentrations in plant tissue were measured. The results of Griffing analysis showed that general and specific combining abilities were significant for all traits except tiller number and K element. In terms of Take-all disease RESISTANCE, the best general combiners were 1622 and 729 genotypes, respectively. The best resistant hybrids were 2109×1546, 546×1528 and 1622×1526 that had the highest specific combining ability. EVALUATION of genetic parameters by Hayman method for disease index and disease score confirmed the results of Griffing analysis and showed that the dominance and over dominance of gene actions had the greatest importance in genetic control of the RESISTANCE to take-all disease (T-41 isolation). Finally, due to low narrow sense heritability and low genetic ratio in RESISTANCE to take-all disease, it can be concluded that selection for RESISTANCE to take-all disease does not respond well in early generations, so selection after purity, that done by bulk, single-seed descent and double haploid methods can be effective in wheat breeding.

This paper examines the work of Immanuel Kant in the light of a new theory on the nature of truth, knowledge and falsehood (the Inversion Theory of Truth). Kant’s idea that knowledge could be absolutely certain, and that its truth must correspond with reality, is discredited by a dissection of the Correspondence Theory of Truth. This examination of the nature of truth, as well as knowledge and falsehood, is conducted with reference to Sir Karl Popper’s writings on regulative ideas, the criterion of demarcation and the principle of falsifiability. It is argued that if truth is to be regarded as certain, it should be used to describe objects and events in the objective (noumenal) state, and that subjective knowledge must contain (and is improved by) falsehood. Perceptions and knowledge are obtained by the biological and evolutionary process of Active Subjectivism. Ideas we have knowledge of can be metaphysical or scientific, according to Popper’s Criterion of Demarcation. Kant’s “Copernican revolution” claim that our intellect imposes absolutely true laws on nature could not allow for the possibility that ideas might be constructed from fallible perceptions, and hence that all knowledge is uncertain. Instead, he developed a Critique of Practical Reason in which religion, though not provable through logical reasoning, could be proved by our innate moral sense, giving us a Categorical Imperative that could lead to perverse results. By rejecting the absolute certainty of a priori knowledge, and admitting a degree of essential falsehood, we arrive at a more reasonable grounding for moral behavior.

RESISTANCE is one of the fundamental Quranic values in the cause of the development of the Islamic society and the formation of the Islamic civilization, which means standing and resisting against something has upset the balance in internal and external dimensions. The formation of this value in the society as one of the methods of the conventional model of human life in the fields of human life; So that its manifestation can be observed in the totality of social behaviors, it is called the culture of RESISTANCE (Problem statement). The purpose of this article is the achievement of the engineering process of this value in a society based on the growth-oriented thought (ideological) system of the Holy Quran (Purpose). Now the question is what process does the Holy Quran propose in order to engineer the culture of RESISTANCE in the society? (Question). The necessity of examining this issue is clear considering the emphasis of religious teachings on this value and the need for Islamic societies, especially considering the current conditions of Islam and the need for convergence and coordination between the RESISTANCE front (Necessity). The research method in stating the engineering process and its components is qualitative content analysis with an analogy approach (Method). The findings of the research show that the engineering process of RESISTANCE culture is based on a self-awareness and purposefulness, according to the idea of Quranic growth, in a three-stage process that leads to the happiness of man and human society (Conclusion).

A B S T R A C TSatisfaction is considered one of the effective methods for evaluating the success of urban development plans and projects, and it is a tool to measure which type of housing and residential environment meets the needs, expectations, and aspirations of residents. This article aims to compare Amiriyeh and Pay-eToop neighborhoods in Bojnord city in terms of residents' satisfaction with living in these neighborhoods. Using a questionnaire, the data was obtained by a survey from 229 heads of sample households living in Bojnoord city. The residents' satisfaction is analyzed by 26 indicators set as home and neighborhood indices. The data is entered into SPSS software to run the One Sample T-Test and calculate statistical parameters. Also, the data is entered in Arc GIS in accordance with the UTM coordinates of the responder's locations to provide a GIS point layer to use zoning maps to be drawn. Residential satisfaction is lower than average and slightly higher in Pay-eToop than in Amiriyeh. Also, the average score of the indicators that are set as home indices is lower than those for neighborhood indices. The zoning maps indicate that most parts of the neighborhoods show an average level of satisfaction with housing, and the maps of different indicators are not much different from each other. The role of physical indicators in low satisfaction is much more significant than social indicators. To improve satisfaction, paying attention to the neighborhood regeneration and improving the housing quality is necessaryExtended AbstractIntroductionSatisfactory housing is one of the most valuable aspects of life and one of the main elements of people's living standards. The higher the level of satisfaction with a place, the more people will feel a sense of belonging to that place and feel more relaxed about being there. The feeling of satisfaction from a place can cause the positive effects of the place in the process of relationships in which the environment is being formed and carried out. On the one hand, satisfaction measurement is considered one of the effective methods of evaluating the success of urban programs and plans. On the other hand, it is a tool to measure which type of housing and residential environment currently meets its residents' needs, expectations, and aspirations. MethodologyThe residents' satisfaction is analyzed by 26 indicators set as home and neighborhood indices. A questionnaire gathers the data. Household heads in the studied neighborhoods (Amirieh and Pay-e Toop) are randomly selected as 229 sample people. The sample people evaluate the items in the questionnaire in a 5-range of the Likert scale from very high to very low. The qualified range was then changed to quantified scores from 5 to 1. Afterward, they were entered into SPSS software to run the One Sample T-Test and calculate other statistical parameters. The address of each respondent is included in the questionnaires, and based on the address, the UTM coordinates of the respondent are determined using Google Earth. Then, the information from the questionnaires is entered into the GIS according to the coordinates to provide a GIS point layer for drawing zoning maps. Results and discussionThe score of 2.75, which is the average figure of the EVALUATION scores for all the indicators of both neighborhoods, indicates that residential satisfaction is lower than the assumed average score (3). The average scores are 2.90 and 2.57 for Pay-e Toop and Amirieh neighborhoods, respectively, and they indicate that the residential satisfaction in the first is slightly higher than the other. Pay-e Toop is the oldest neighborhood in Bojnoord, which accommodates the traditional complex of shops (Bazar) and essential physical elements of historical eras, such as the city's citadel. In addition to the high proportion of immigrants, it also includes deep-rooted and native families that have strong social relationships. Also, the average score for the neighborhood indices is slightly higher than for the home indices. The average figure for all 26 indicators is lower than the assumed average score (3) and indicates a lower residential satisfaction. Five indicators with the higher satisfaction score are as follows: relationship with neighbors, living in the ancestral neighborhood, the situation of streets and ways, living with relatives, and the quality of wastewater disposal. On the contrary, lower satisfaction scores belong to the indicators of access to shopping centers, healthcare service centers, the size of homes, and access to public transportation, respectively. Despite the fame of the gardens of Bojnord in previous centuries, in recent decades, most of the gardens disappeared, especially in the city's central business district, which corresponds to the two studied neighborhoods; there is a small area of land covered by parks and green spaces. Green spaces are mainly the small green strips on the edge or in the middle of the streets. For Amiriye and Pay-e Toop neighborhoods, the Pearson correlation coefficient between the respondents' education levels and their scores of residential satisfaction are -0.36 and -0.23, respectively. It implies that residential satisfaction has an inverse relationship with education. Also, the correlation coefficient between the residence length in the neighborhood and residential satisfaction scores are +.001 and -0.29, respectively (for Amirieh and Pay-e Toop neighborhoods). It also indicates no relation for the first neighborhood and an inverse relation for the other.The zoning map of all the indicators shows that in more than 90% of the neighborhood area, the level of satisfaction is in the medium range. In Amirieh, the parts with low satisfaction are scattered. It can be said that the northeastern edge of the Amirieh neighborhood and the southwestern edge of the Pay-e Toop neighborhood have lower satisfaction. ConclusionThe role of physical indicators in low satisfaction is much more significant than social indicators. The physical components of the neighborhoods caused a low level of satisfaction. On the contrary, higher satisfaction is revealed from the socio-cultural components. Households prefer the quality of services more than the availability of services. In medium-sized cities such as Bojnoord, neighborhood relations, closeness to relatives, and living in neighborhoods where the ancestors lived are still decisive in creating residential satisfaction. To improve life satisfaction, paying attention to housing quality and the regeneration of both neighborhoods is necessary. Also, improvement, retrofitting, enhancing the quality of the building, and improving the quality of urban services, especially healthcare services, public transportation, and commercial services, should be considered. FundingThere is no funding support. Authors’ ContributionAuthors contributed equally to the conceptualization and writing of the article. All of the authors approved thecontent of the manuscript and agreed on all aspects of the work declaration of competing interest none. Conflict of InterestAuthors declared no conflict of interest. Acknowledgments We are grateful to all the scientific consultants of this paper.

Wheat yellow rust, caused by Puccinia striiformis f. sp. titici, is one of the most important and most destructive diseases of wheat in many parts of Iran, which decreases crop yield in epidemic years. Host RESISTANCE is the most economical method for the management of yellow rust and partial RESISTANCE (a type of quantitative RESISTANCE), proven to be more durable than other types of RESISTANCEs. In this study, partial RESISTANCE parameters including coefficient of infection (CI), final disease severity (FDS), relative area under disease progress curve (rAUDPC) and apparent infection rate (r) were evaluated in a set of twenty-four wheat genotypes along with susceptible control during two crop years from 2015 to 2016. The research was conducted at Allarough Agricultural Research Station in Ardabil, under natural and artificial inoculation conditions. Artificial infection of genotypes was performed using the yellow rust race population having virulence for Yr2, Yr6, Yr7, Yr9, Yr17, Yr22, Yr22, Yr23, Yr24, Yr25, Yr26, Yr27, Yr26, Yr27, Yr21, Yr21, Yr31, Yr32 and YrSU RESISTANCE genes. Seedling response was also evaluated under field conditions. The EVALUATION of RESISTANCE parameters showed that six lines were resistant at both seedling and adult plant stages. Eleven lines showed RESISTANCE reaction at seedling stage, but moderate or susceptible reactions at adult plant stage. Seven lines (entries; 1, 4, 7, 8, 9, 16, 22) were susceptible at the seedling and had moderate (MR, M or MS) reactions at adult plant stages. Therefore, these lines having low values of different RESISTANCE parameters are likely to have varying degrees of partial RESISTANCE or high temperature adult plant RESISTANCE (a type of non-specific or durable RESISTANCE). Cluster analysis based on the reaction of seedling and adult plant, divided the lines into different groups, which also indicated a high diversity of lines in response to yellow rust disease.

Because the mutant mlo allele causes a non-race specific and broad-spectrum RESISTANCE to powdery mildew caused by Blumeria graminis f. sp. hordei, the Mlo gene was taken into consideration in barley. Mlo genes also play important roles in plant growth and responses to biotic and abiotic stresses. The Mlo gene family has been studied in several plant species. In this study, we used bioinformatics tools and searches in genomic databases to reveal the genetic characteristics and protein structure of the Mlo family in wheat (Triticum aestivum) and apple (Malus domestica ). We employed Mlo proteins sequences of Arabidopsis thaliana as a template for tBLASTn, which eventually identified 29 MdMlo (M. domestica Mlo) proteins and 11 TaMlo proteins (T. aestivum Mlo). The comparative phylogenetic analysis classified MdMlo and TaMlo proteins into three main clades and showed that, regardless of plant species, Mlo1s (the first member of the Mlo protein family in wheat, apple and Arabidopsis), Mlo2s, Mlo3s, and so on up to Mlo12s, are closely related. This indicates that after the separation of these species, no further expansion has been occurred in the Mlo gene family. The functionally conserved motifs present in the Mlo proteins were investigated using MEME tool, which showed a maximum of 15 and minimum 10 conserved motifs. The genes TaMlo6, MdMlo8, MdMlo11, TaMlo2, and TaMlo1 are predicted to participate in powdery mildew RESISTANCE because of having E/D-F-S-F motif. Analysis of gene organization, protein properties, and conserved domains revealed that the M. domestica and T. aestivum Mlo gene paralogs are more divergent from each other than from their orthologous pairs.

A B S T R A C TToday, all officials involved with the challenges of city sustainability have accepted the idea of a smarter city, using more technologies, creating better living conditions and protecting the environment for a better quality of life. The central part of the metropolis of Tabriz is based on Region 8 and part of Region 10, a historical-cultural area with an area of 286 hectares and a population of about 40 thousand people in 8 neighbourhoods. This research was compiled to evaluate and explain the regeneration of the central part of Tabriz city with the approach of smart growth and in line with the sustainable development of problematic neighbourhoods in the 8th district of Tabriz metropolis. The present review is methodologically practical, to describe and analyze the goals of regeneration based on library studies. The statistical population of the research includes experts and people living in the central context. In the first part, the Delphi method was used by asking experts. In the second part, the structural equation method of SPSS and AMOS software is used. According to the results of using the scales of design, pedestrian-oriented, intergenerational justice in the actual situation and 3 indicators of management and productivity, stable and value-creating jobs are in the potential situation. Also, two environmental indicators with the most direct and indirect effects and a cultural index have been decisive in the regeneration with the smart growth approach in the central part of Tabriz city. Therefore, in the regeneration of the central part, the studied indicators should be used simultaneously and integrated into the reconstruction projects of the central fabric of the city to lead to smart sustainabilityExtended AbstractIntroductionSmart growth is considered a lever for revitalizing neighborhoods and urban centers. In a general scenario of smart growth, knowing the time and resources of investment provides a new and sustainable life in the city center and worn-out and old textures. Moreover, finally, it will improve the quality of urban neighborhoods, especially worn-out ones, and revive them. Tabriz metropolis, one of the most important and largest cities in the country, with a long history of settlement, especially the central and old texture, due to developments in information and communication technology, extensive environmental, social, and economic changes in terms of time requirements, the traditional texture of roads, Deterioration of residential units, lack of equipment, infrastructure and urban services and environmental problems have caused the failure and physically turned into inefficient and problematic textures. Urban planning and development science must adopt a new decision and approach to face the existing and complex issues of worn-out texture. The main problem of the research is to evaluate and explain the regeneration of the central texture and strengthen them in line with the sustainable development of the problematic neighborhoods of Tabriz metropolis according to the solutions and principles of smart urban growth. Therefore, the main goal of this research is to answer the following question:- What are the effective indicators and components in the regeneration of the central texture of Tabriz metropolis with a smart growth approach? MethodologyThis research is applied and fundamental in terms of purpose and descriptive-analytical. The collection methods are based on documentary and library studies, surveys, and interviews. In the first part, qualitative data was prepared with an open questionnaire and through interviews, as well as the review of documents and quantitative data used in this research numerically and through the weighting of Delphi questionnaires based on the consensus index model to determine importance, certainty, and priority. The panel members were 19 people (including 5 university faculty members, 7 field research experts, 4 executive experts, and 3 graduate students) selected based on the non-probability (targeted) method. In the second part, Cronbach's alpha method was exerted to measure the reliability of the questions, which was obtained as 0.89. In order to evaluate the validity of the questionnaire, the Lawshe method was exploited. The statistical population of the second part includes District 8 of Tabriz, which is the central texture of the city and is equal to 34,231 people. According to Cochran's formula, the sample size was equal to 379 people. Results and discussionIn the next step, path analysis was performed using AMOS 23 software to compare the integrated model with the hypotheses. The results of the path analysis, while verifying the structures, show that the value of the index of the critical ratio to the degree of freedom (CMIN/DF) is equal to 4.01, which is an optimal value for the model fit. Also, the goodness of fit index (GFI) is 0.952, which indicates the acceptability of this amount for the optimal fit of the model. The value of the root means the square error of estimation (RMSEA) is 0.065, which is acceptable because it is smaller than 0.08 and indicates the confirmation of the research model. Also, the Tucker-Lewis index (TLI) is 0.917, the comparative fit index (CFI) is 0.92, and the normalized parsimonious fit index (PNFI) is 0.882, which all indicate that the fit and verification of the research model are desirable.Therefore, none of the objects are removed and remain in the model. Therefore, it is confirmed that the factor structure of regeneration indicators with the smart growth approach has reliability and construct validity. Also, the second-order factor analysis shows that the factor loadings of all regeneration indicators with the smart growth approach are greater than 0.4 and are significant at the 95% probability level. According to the results, the environmental dimension with a factor loading of 0.94 has the most significant effect on urban regeneration with the smart growth approach in the central texture of Tabriz city. After that, quality of life with a factor loading of 0.92, social dimension with a factor loading of 0.88, economic dimension with a factor loading of 0.83, physical dimension with a factor loading of 0.81, transportation dimension with a factor loading of 0.74 and cultural dimension in order with a factor loading of 0.72, are in the following ranks.According to the final structural model results, the environmental index has the highest value, with a direct effect of 0.594 and an indirect effect of 0.275. Moreover, after that, respectively, the quality of life index with a direct effect of 0.513 and an indirect effect of 0.236, a social index with a direct effect of 0.476 and an indirect effect of 0.217, an economic index with a direct effect of 0.451 and an indirect effect of 0.222, Physical with the direct effect of 0.435 and indirect effect of 0.205, mobility index with the direct effect of 0.373 and indirect effect of 0.182 and cultural index with the effect of direct values of 0.295 and indirect effect of 0.153 are influential in regeneration with smart growth approach in the central part of Tabriz city. ConclusionIn this research, seven main indicators related to the subject were investigated. The results showed that the environmental index with the most significant direct and indirect effect is the focus of the EVALUATION. After that, dimensions and indicators of quality of life, social index, economic index, physical index, mobility index, and cultural index have been influential. According to the results, the urban environment index was analyzed as the most important factor at a high level, and this means that for urban regeneration with a smart growth approach, improving the environmental and physical conditions in the worn-out and central texture of Tabriz city in the current situation is a priority. It is first. This is the most well-known part of regeneration with a smart growth approach. The analysis results show that this is not the case only in the case of transportation infrastructure. However, more comprehensive urban infrastructure such as the urban landscape, open spaces, green and parks, etc. are also crucial in improving the physical conditions of the infrastructure. Also, this study's results show that the economic sector's importance is as important as improving the physical conditions of the infrastructure. In addition, in the worn-out texture of District 8 of Tabriz city, the sociocultural sector is essential, and the revival of historical and cultural resources is considered one of the urban regeneration options. Funding There is no funding support. Authors’ Contribution All of the authors approved the content of the manuscript and agreed on all aspects of the work.  Conflict of Interest Authors declared no conflict of interest. AcknowledgmentsWe are grateful to all the scientific.

Strength measurement of rock requires testing that must be carried out on test specimens with particular sizes in order to fulfill testing standards or suggested methods. Often, the coring process breaks up the weaker core pieces, and they are too small to be used in either index tests or conventional strength tests such as point load index (Is) and Brazilian tensile strength (BTS). One of the index tests to indirectly determine the rock strength is the block punch index (BPI) test, which requires flat disc specimens without special treatment. This study aimed to evaluate the applicability of the BPI test for predicting the uniaxial compressive strength (UCS), BTS and IS of the sandstones by empirical equations. Also, we have compared the performance of the BPI and IS for predicting the UCS and BTS. It was experimentally shown that BPI is a reliable method for predicting the UCS, BTS and Is of the sandstones under study. Moreover, the results indicate that BPI could be utilized with same importance as Is for predicting the UCS, while predicting the BTS by Is appears to be more reliable than BPI.